File:Lasercut Kerf Calibration.zip

Lasercut_Kerf_Calibration.zip ‎(file size: 16 KB, MIME type: application/zip)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Summary

Laser Cutter Kerf Calibration jig (test-piece) Formats:

  .scad OpenSCAD customizable sourcecode
  .dxf (100x30mm)
  .rld RDWorks job (100x30mm)

See sourcecode for instructions.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	11:39, 10 September 2022	(16 KB)	IanM (talk \| contribs)	Laser Cutter Kerf Calibration jig (test-piece) Formats: .scad OpenSCAD customizable sourcecode .dxf (100x30mm) .rld RDWorks job (100x30mm) See sourcecode for instructions.

You cannot overwrite this file.

The following page uses this file: