Difference between revisions of "Blog 2019"

From Richmond MakerLabs
Jump to navigation Jump to search
Line 4: Line 4:
  
 
''You can read about previous activity at''  [[Blog_2018| What we did last year ]]
 
''You can read about previous activity at''  [[Blog_2018| What we did last year ]]
 +
 +
=2019-05-28 Tuesday=
 +
* Andy worked with the CNC machine
 +
* Peter achieved great results with the LED panels
 +
* The giant NIM machine was assembled, with the help of Garret, Carla and IanB
 +
* Chris was in to do some laser cutting. He also trained two people in the safe use of the laser cutter.
 +
* Hi to Barry, returned after a few weeks 'oop North'
 +
* PaulB donated a chair
 +
* Richard found out how to use the Delta 3D printer and successfully printed something from Thingiverse.
 +
* Kevin returned the electric drill he had borrowed, but it's no longer working.  That's OK, it didn't work when it was donated to us.  We repaired it once, we can repair it again!
 +
* Some other people did some other things, as always
 +
* ''' Attendance tonight = 14 '''
  
 
=2019-05-21 Tuesday=
 
=2019-05-21 Tuesday=
*Mark was gettings a 3 colour laser up and running but play was stopped by not having the right power supplies
+
* Mark was gettings a 3 colour laser up and running but play was stopped by not having the right power supplies
*Jools was counter balancing a lamp, which involved blow torching something
+
* Jools was counter balancing a lamp, which involved blow torching something
*Carla was continuing to make the Nim machine, onto some gluing now
+
* Carla was continuing to make the Nim machine, onto some gluing now
*Vish was showing off his new camera and brought biscuits, fitting in nicely
+
* Vish was showing off his new camera and brought biscuits, fitting in nicely
*Jane was taking apart an old dell keyboard that was in the bin, rescuing keys from WEEE
+
* Jane was taking apart an old dell keyboard that was in the bin, rescuing keys from WEEE
*John was helping Jane, fielding some questions and fielding some questions about his recent trips
+
* John was helping Jane, fielding some questions and fielding some questions about his recent trips
*Peter helped Jane with a grub screw on a shower head, felt the taste of success but then started with the lights again.  
+
* Peter helped Jane with a grub screw on a shower head, felt the taste of success but then started with the lights again.  
*Martin was playing some music
+
* Martin was playing some music
*Paul was working on his micro controller programmer
+
* Paul was working on his micro controller programmer
*Paul popped by to help as always
+
* Paul popped by to help as always
*3 New visitors this week
+
* 3 New visitors this week
**Martin who's looking to make a complicated powered dust filter
+
** Martin who's looking to make a complicated powered dust filter
**A nice lady who was asking about using 3D printer to make ceramics moulds for her sister
+
** A nice lady who was asking about using 3D printer to make ceramics moulds for her sister
**Trish, who was looking to do some wood work to fix an old chair
+
** Trish, who was looking to do some wood work to fix an old chair
  
 
=2019-05-14 Tuesday=
 
=2019-05-14 Tuesday=
*Martin was trying to extend a heatsink to install a peltier on a motherboard
+
* Martin was trying to extend a heatsink to install a peltier on a motherboard
*Carla was doing great work scaling up the Nim machine for Ham fair
+
* Carla was doing great work scaling up the Nim machine for Ham fair
*Hello to Vish, first time visitor that wasn't
+
* Hello to Vish, first time visitor that wasn't
*Paul was setting fire to something from the crystal maze
+
* Paul was setting fire to something from the crystal maze
*Jane rescued interesting parts from a boring charger and is gluing together alphabet building blocks for yet unknown reasons
+
* Jane rescued interesting parts from a boring charger and is gluing together alphabet building blocks for yet unknown reasons
*Garret Helped Jane out with some gluing
+
* Garret Helped Jane out with some gluing
*Andrew was designing some clever circuit I didn't understand
+
* Andrew was designing some clever circuit I didn't understand
*Special thanks for Carl for letting people in when Andy messed up the days
+
* Special thanks for Carl for letting people in when Andy messed up the days
  
 
=2019-05-07 Tuesday=
 
=2019-05-07 Tuesday=

Revision as of 10:44, 29 May 2019


What we have been doing at Little House

You can read about previous activity at What we did last year

2019-05-28 Tuesday

  • Andy worked with the CNC machine
  • Peter achieved great results with the LED panels
  • The giant NIM machine was assembled, with the help of Garret, Carla and IanB
  • Chris was in to do some laser cutting. He also trained two people in the safe use of the laser cutter.
  • Hi to Barry, returned after a few weeks 'oop North'
  • PaulB donated a chair
  • Richard found out how to use the Delta 3D printer and successfully printed something from Thingiverse.
  • Kevin returned the electric drill he had borrowed, but it's no longer working. That's OK, it didn't work when it was donated to us. We repaired it once, we can repair it again!
  • Some other people did some other things, as always
  • Attendance tonight = 14

2019-05-21 Tuesday

  • Mark was gettings a 3 colour laser up and running but play was stopped by not having the right power supplies
  • Jools was counter balancing a lamp, which involved blow torching something
  • Carla was continuing to make the Nim machine, onto some gluing now
  • Vish was showing off his new camera and brought biscuits, fitting in nicely
  • Jane was taking apart an old dell keyboard that was in the bin, rescuing keys from WEEE
  • John was helping Jane, fielding some questions and fielding some questions about his recent trips
  • Peter helped Jane with a grub screw on a shower head, felt the taste of success but then started with the lights again.
  • Martin was playing some music
  • Paul was working on his micro controller programmer
  • Paul popped by to help as always
  • 3 New visitors this week
    • Martin who's looking to make a complicated powered dust filter
    • A nice lady who was asking about using 3D printer to make ceramics moulds for her sister
    • Trish, who was looking to do some wood work to fix an old chair

2019-05-14 Tuesday

  • Martin was trying to extend a heatsink to install a peltier on a motherboard
  • Carla was doing great work scaling up the Nim machine for Ham fair
  • Hello to Vish, first time visitor that wasn't
  • Paul was setting fire to something from the crystal maze
  • Jane rescued interesting parts from a boring charger and is gluing together alphabet building blocks for yet unknown reasons
  • Garret Helped Jane out with some gluing
  • Andrew was designing some clever circuit I didn't understand
  • Special thanks for Carl for letting people in when Andy messed up the days

2019-05-07 Tuesday

  • PeterHow did a great job in activating the LED message-board in preparation for Ham Fair
    MessageBoard
  • Thanks to MartinL for mounting panels on a firm base
  • Carla started on laser cutting for the NIM game, also for Ham Fair
  • PaulE and Michael were looking at Paul's new Tiny micro programmer
  • Jane took a small electric motor apart and found a wealth of interesting shapes within
  • PaulB helped out, and made tea and coffee for some
  • Kevin looked for a HUG banner for the Ham Fair and gave Carla some help cutting a sheet of wood
  • Hi and Welcome to Danyal and Ateeq who came along to see what we do. They are mainly laser cutter users.
  • IanB spent some time using the CNC machine to mill egg-holders into breadboards, for Kim
  • David checked out his 3D printed battery-holder and will now make modifications to the design He also investigated the new Geeetech printer which is not yet ready to run.
  • Hi to Mark. He called in to see PaulE who made some connections to a laser electronics assembly.
  • Yaroslav is modifying a pair of boots. We have the tools for that.
  • Attendance tonight = 16

2019-04-30 Tuesday

  • Jon separated the recyclable material from the Low Carbon Project clear-out, and recycled it
  • MartinC's missing wristband was discovered in the recycling process
  • PeterHow looked at an ST micro dev kit, but wasn't impressed. He also took a look at the hardware for the LED panels
  • Carla had work to do but also took on laser cutting for the Ham Fair NIM board
  • Jane needed acrylic lids for two wooden boxes. PaulB helped with measurement, Carla operated the laser cutter and two perfect lids were made.
  • Garret brought a batch of 25mm marbles (for the NIM machine), and donated a water-heater that could replace the old-fashioned 20th-century electric kettle. Thanks.
  • MartinL took sample LED panels, with a view to mounting them securely for the Ham Fair. Martin also mused over how to discharge a 500 Farad capacitor into a small electric motor.
  • David and PaulB took a look at the Phrozen printer which has a damaged diaphragm and LCD. The former was replaced and the latter was ordered.
  • IanB accepted a donation of two electric drills. He repaired the first and discarded the second.
  • Yaroslav worked with the Plasplugs electric drill sharpener. It kind-of works but you need quite a bit of skill, in order to get good results. Yaroslav also offered to look at programming the LED display panels and took away a sample to try.
  • AndyH brought the missing parts to get the bandsaw going again. He and Jon spent some time fixing it up, but really it needs a new blade now. Andy will get one.
  • PeterS looked in to see how we are getting along, and chatted to some members.
  • Attendance tonight = 13

2019-04-23 Tuesday

  • Jane added two legs to a 3-legged table
  • Andy, Jon, Jill and David W combined forces to identify stuff that was in storage no longer needed.
  • PaulE is starting a new minimal microprocessor design
  • Garret took apart some domestic electronic appliance and extracted one or two useful bits.
  • Teo and Lucille returned to wire up a projector, and Teo has a 3D print job. The Zombie printer had other ideas and IanB spent some time tying to re-animate it.
  • David had a problem with the liquid resin 3D printer, and PaulB helped him sort it out. David's still in need of reliable 3D print facilities.
  • Jules did silver-soldering using a blowtorch (outside). It turned out quite well.
  • MartinL has his remote control working now, after a few weeks of trying
  • Phaedra turned up and got some help with her mobile phone, and with a large file download.
  • Attendance tonight = 13

2019-04-16 Tuesday

  • Jane brought a DVD & VHS cassette machine which she pulled apart with the help of Jon and PeterHow. Inside were many treasures.
  • PaulB started a liquid resin 3D print using the Phrozen printer.
  • David started a 3D print on the zombie printer, but the zombie was having none of it and created problems with adhesion and extrusion. IanB resolved to get Nigel's newly donated printer into operation real soon.
  • Leticia laser-cut some fabric, using designs she had prepared earlier
  • Carla laser-cut some new acrylic designs
  • PeterH came to get some Alien Leg Joints which IanB had milled in copper (imperfectly). Peter provided a new sheet of copper which IanB will try to mill with a finer bit size.
  • Garret took apart some video remote controls and acquired a few infra-red light emitting diodes (IR-LEDs).
  • Attendance tonight = 11

2019-04-09 Tuesday

  • Andrew working on an Arduino Nano with a loudspeaker
  • MartinC busy as ever, also kindly looked at a briefcase with a broken handle, for JillL
  • PeterHow brought a small single-board oscilloscope and a signal generator. Hasn't quite cracked it yet. He also has designed a cardboard case for R. Pi Zero, an impressive fusion of origami and scalpel-work.
  • PaulE has developed a programmer for the ATtiny. Today it erased the uP successfully. Paul also showed a pic of the stage prop bomb-with-electronic-timer.
  • Nigel dropped in and donated to us a Geeetech I3 3D printer. It's a Prusa I3 look-alike. The wiring needs a bit of tidy-up, but it could become our No1 work-horse 3D printer. Thanks Nigel.
  • Carla was laser-cutting acrylic.
  • Dan looked in to see how it's going
  • Lucille and Teo made their first visit to us. Teo is a younger person very keen on creating objects and gadgets. He's also familiar with coding in Python. Today, PeterHow showed Teo how to solder, and he connected up a DC-DC converter to drive a 12v LED, making a projector.
  • We got out the PDS120 Scroll Saw from under the CNC machine. Too long it's been hidden away after breaking a blade. Dave found it has two spare blades and fitted one. Now there's a scroll saw (in the kitchen) for lightweight sheet material cutting.
  • PeterH came along with a part-built Alien Fighting Machine (from HGWells novel 'War of the Worlds'). IanB had cut some parts in brass sheet for this machine. When he tried to cut parts in copper, the milling bit snapped, so we need another. The alien invasion has been delayed.
  • PeterH also donated a Drill Sharpening set to us, thanks. This is a complicated electric-driven thing that Yaroslav will (probably) take a look at.
  • Dave wants to 3D print a replacement end for an electric bike battery. The difficult part is modelling the shape in software. IanB gave a hand, but this is going to take a while.
  • Garret came along with some ideas. He was going to bring The Internet with him, but somehow it got left behind. Despite this, we all managed to get by.
  • MartinL has got a lovely old bakelite Bush valve radio, from the Richmond Cafe (on Richmond Hill). He's going to get it working again, and consulted IanB about electrical safety. The answer is: it's not safe to touch it. But enclosed in the bakelite case with plastic knobs on, no problem.
  • Yaroslav laser-cut a picture frame which he had designed. Despite using known speed and power settings, the laser couldn't cut through 3mm acrylic in one pass. It may be losing power again, and in need of TLC. Who's going to take on that challenge?
  • Attendance tonight = 15

2019-04-02 Tuesday

  • MartinL looked for a TO92 heatsink
  • Carla laser-cut bow shaped hair grips from acrylic sheet
  • Jon used the laser cutter
  • Jane took apart a weather station and extracted a 7-day clock.
  • IanB experimented with brass milling on the CNC machine
  • Barry did some Arduino work
  • Colin brought in a broken speaker, which couldn't be repaired
  • Attendance tonight = 11

2019-03-26 Tuesday

  • Didn't see much of what was going on this week, as I was shut in the CNC room trying to mill a sheet of brass.
  • Jane was trying to find a way to attach wooden parts together, and she received advice and assistance from several members.
  • Jules started learning how to create drawing files for the laser cutter
  • Carla did some laser cutting
  • PaulE continues to evaluate the ATtiny microprocessor and found it lacking an accurate master clock
  • PeterH brought sheets of brass and copper to be CNC milled. Being guided by IanB wasn't much good as Ian knows next to nothing about milling.
  • Phil, Barry and others watched some of the milling process.
  • Garret and IanB discussed plans for the Dr Nim machine mentioned last week, and possibly a Shannon mind-reading machine.
  • Some biscuits were eaten, but several new packs remain. Thanks for the choc crispy things, someone.
  • Attendance tonight = 15

2019-03-19 Tuesday

  • Nice how people contribute biscuits for the MakerLab community. This week we had something of a surfeit with two packs of choc digestives, Oaty biscuits, choc crispy pieces and salted caramel tea-cakes. The excess packs have been stored in the kitchen and we will probably get through them in the coming weeks.
  • PeterHow was glazing and gluing tiny windows into an N-gauge building, a job that looked like it will take weeks
  • Garret made a glue repair to a Swiss Army knife style of camping cutlery, and started to look at making a larger version of the Dr Nim machine, with IanB.
  • MartinC continued what he was doing last week.
  • Welcome to Barry who joined us for the first time this week.
  • Linda came along to use our PAT device, but IanB couldn't find it. (Later he discovered it was away for calibration)
  • Martin L dis-assembled a Mac motherboard
  • Jane cut pieces off a curtain pole
  • PaulB was around, and helped Jane with her wooden legs.
  • Carla continued with some design work and later used the laser cutter
  • Jules renovated and repaired a wooden automation
  • AndyH is looking more closely at the CNC and started cataloguing the milling bits we have
  • Jon started drilling another jam tart tray, but it didn't go at all well. The CNC used up three 2mm drills and again lost its X-Y position. Something there needs investigation.
  • ChrisR laser cut a piece of 3mm MDF for use as a form tool.
  • Attendance tonight = 14

2019-03-12 Tuesday

  • PeterHow experimented with the laser cutter, to see how finely it could cut.
  • Jane put finishing touches to three pewter fishes and a pewter-cast stone mount.
  • Jules cut a disk from brass sheet.
  • Carla laser-cut some designs and produced a card-box.
  • PaulE investigated the new ATtiny microprocessor range and successfully programmed one of them.
  • Garett discussed with IanB the Doctor Nim game and the Shannon-Hagelbarger mind-reading machine.
  • Jon drilled a large number of 2mm holes in the base of a jam tart tray. It went well.
  • Martin did something more to the model ekranoplan and started to look into ways of milling a solid guitar body from a wood block.
  • Attendance tonight = 10

2019-03-05 Tuesday

  • The main event this evening was a demonstration by Jules, showing how he makes a mould for casting, and how the mould is filled with molten pewter to make a detailed cast metal object. It's also possible to carve a mould in cuttlefish bone, and Jane cast a small fish image in a cuttlefish mould which she had brought along. See a video of the demonstration here: Pewter-casting
  • MartinC has a design ready for experimental resist cutting using the laser cutter
  • Carla made some more rubber stamps
  • Jane continued preparing her wooden structure
  • Aki and Fred made a large number of small items using the laser cutter
  • Jon used the CNC mill for drilling a piece of pressed metal
  • Jules showed a candle-holder turned on the lathe
  • Carl brought a bicycle pump which he had repaired after it had been discarded. The pump becomes one of the RML tools available for members use.
  • Carl demonstrated a 'mains power failure alarm' which he had put together from an obselete mobile phone. It sends a text message when power fails, and another when power is restored. The alarm will be installed at Meadlands school for monitoring the school's heating system.
  • Kevin used the microscope searching for evidence of ear mites in a cat. He didn't bring the cat.
  • Hi to Dan who we haven't seen for many weeks,
  • Attendance tonight = 16

2019-02-26 Tuesday

  • Jon did some laser cutting
  • Garret had a new game of Nim, a clever mechanical computer, with ideas of scaling it up to work with marbles. He also took apart a popcorn maker out of interest to see how it works. As a result, we now have a plinth to place the donations dish in plain sight.
  • Jules spent some time on the lathe, turning a piece of brass, and afterwards using taps and dies.
  • Jane modified a couple of right-angle brackets into 22-degree brackets, then added M4 bolts.
  • Peter activated his 4-motor tracked vehicle and we watched it manoeuvring over chunks of wood and other obstacles.
  • Danny's got plans for infra-red robotic sensors
  • Martin brought half-choc mini-donuts. Not at all bad.
  • Carla had purchased laserable rubber sheet. The laser cutter can produce rubber stamps from this rubber sheet. Carla made a couple of stamps and generously donated the sheet to RML. Now we can forge our own visas and travel to Europe whenever we want.
  • ChrisR and Ann brought in a poorly Win7 laptop. AndyH took on the challenge and improved it greatly. Thanks, Andy.
  • We met Ian, a retired person who was interested to see what we do, and who might look in again.
  • MartinL discovered why his MOSFET wasn't switching and will see what to do next.
  • Kevin and Sufiyo discussed plans for adding a shed to the yard at Little House, for Friends of Ham Lands to keep their tools and equipment.
  • Attendance tonight = 16

2019-02-19 Tuesday

  • Quietly continuing work on laptop were PeterHo, Andrew, Jon, Carla and MartinC
  • Mark came in to look at the thread-cutting drive on the lathe, and found out why it wasn't working as it should.
  • ChrisR is planning to cut internal and external threads for optical work, and co-ordinated with Mark
  • Jules used the lathe, working in brass
  • PeterHa brought wood for the CNC mill, and used the laser cutter to create leg joints for an alien invader
  • Imi called in to say Hi, and gave some help with moving heavy items
  • William donated a UPS, which was left in the 3D printer office beside the server
  • PaulB was around for a time.
  • MartinL chatted to IanB about alternative techniques for additive manufacturing.
  • MarkW had brought some thermoplastic beads to show to ChrisR. He poured boiling water on them and they turned into a malleable sticky mess which cooled down into something very solid.
  • Attendance tonight = 14

2019-02-12 Tuesday

  • Garret looked into modification to solar-powered led lights. He also had about 10 mousetraps and found more than 10 ways to trip them off
  • Peter fitted batteries to a mechanical crab brought along by Jane. Crab walked towards mousetrap.
  • MartinC continued software design.
  • Jane's making good progress with her wooden construction. Notches were cut into the top bar to accommodate a curvy piece of wood.
  • Hi to new member Jules who came along to see what we do. Jules is a retired person, has plans to turn brass rod and work in brass generally. He has offered a demonstration, showing how to cast pewter, and how to make hot metal moulds.
  • Hello also to Analyn and Mark. Jon showed them round the makerspace. They'll be back.
  • MarkW came in to set up the thread cutting drive on the lathe. This involved changing a gear train, which in turn involved making a puller to separate a keyed hub from a small gear. Good job Mark knows what he's doing. By the end of the evening, he'd cut a 1 mm thread in a piece of brass rod.
    Cut thread
  • PaulB kept busy in assisting Jane with notch-cutting and later on helping MarkW with the lathe.
  • PaulE repaired his laptop again and discussed the CNC cutter room with IanB
  • ChrisS cut lots on the laser cutter, which was working OK
  • Jon had something to do on the laser cutter.
  • Aki make good use of the laser cutter, too
  • Carla has some more bookbinding under way
  • John brought in a 3D design he had produced and set it to print on the Zombie printer. Made a promising start, but is going to start again next time.
  • Hi to Carl, I hope we see you more often in the coming weeks.

2019-02-05 Tuesday

  • Peter seems to have completed his ex-aircraft control panel. It's a complete computer and screen in a box, powered by a Raspberry Pi. (pictured) Awesome!
  • Jane spent her time with geometry and a wood-saw, making two massive triangles. Not a single degree was lost. Thanks to Jon for help and support. Jane also crafted some aluminium pieces.
  • Hi to Phil, joining us today. He has some experience in making things and we hope he'll become a regular.
  • Carla took her designs to the laser cutter.
  • Peter H came along with a rifle stock which he would like to duplicate using the CNC router. Ed had offered his knowledge of modelling in Adobe software and spent several hours converting a photo into a workable 3D file with work-holding fixings, dimensions and everything. (pictured) Without Ed's input it would have taken several weeks or months.
  • Ed is looking for some assistance in crimping plugs on to Cat6 cables. IanB had a try with very little success. He recommends an alternative type of plug and will send Ed a sample.
  • ChrisR came along with a lens that was fixed by a nut inside a long tube. Chris wanted to loosen the nut but it needed a very unusual tool. As we didn't have one, Chris made his own from a piece of scrap, using the bench grinder. It worked and the nut was undone.
  • MartinL got a short tutorial on using N-channel MOSFETs from IanB, and Martin checked out a small elctrically operated hydraulic valve he had brought along.
  • Kevin was re-wiring a 5v portable record player. Didn't get to see it working, hope it was all ok.
  • Aki used the laser cutter.
  • Attendance tonight = 12

2019-01-29 Tuesday

  • MartinC continues with that rotary encoder circuit. It has to be a single-sided PCB, to suit Martin's plan for etching.
  • Carla is designing wooden coasters which will be laser-cut
  • PeterH cut an aluminium die-cast equipment case in half, at home, with an angle grinder. He brought it to Little House to finish the job with a hacksaw and some filing.
  • Garret is making a better mousetrap. Honestly, mice will be queuing up to use it.
  • AndyH tested the limits of the laser cutter and found there is no low limit on the Z axis. It took a couple of hours to get back to the top. But well done for sorting it, Andy.
  • ChrisS showed us a model church and houses which he had 3D printed and painted. Some very fine quality printwork.
  • Hi to Gavin, second visit to us. He waited patiently for the laser cutter to be reinstated then gave a hand in levelling the bed. PaulB gave a swift tutorial in how to (safely) use the laser cutter and Gavin successfully cut out a box design which he had brought.
  • Yas and Leem returned to change the power connector on a Thinkpad. They allowed plenty of time, because it's a tricky operation. With a little help and advice from PaulE, Yas got the connector changed and the Thinkpad has a new lease of life. Plus Yas now has a new skill, knowing how to take apart laptops and more importantly how to put them together again.
  • PaulE worked on a tester, to test a batch of his RS485 voltage level translators. Initially the tests were indicating all devices faulty. After getting the tester right, it became a 100% pass rate.
  • MartinL has taken the small model ekranoplan as far as it can go. Now it may have to be scaled up to develop enough power to lift off the ground.
  • Bogdan was tucked away all evening in the 3D print room. He cleared a blocked hot end with a blowtorch and printed some threaded parts for PLA filament feeds.
  • John came along with an extraordinary red glossy plastic radio from another era. It had a loudspeaker with a broken voice-coil wire. After some attempts to repair it with precision soldering, John found we had a spare loudspeaker of about the right size, so he fitted that instead. Fixed!
  • Good to see PaulB again. He's a busy man domestically these days and has less time for tinkering. Paul helped with sorting out the laser cutter and re-levelling the cut bed.
  • ChrisR used the lathe to make a rod with an M3 thread at one end. No, not thread cutting, but tapping and using a piece of studding. Chris ended up making two of these so if he loses one he'll still be OK.
  • PeterS looked in to catch up, and shared some ideas with IanB and with Bogdan.
  • Attendance tonight = 15

2019-01-22 Tuesday

  • MartinC has designed a circuit to connect a rotary encoder to an I2C bus, using a PIC processor. He will create a PCB layout, and then use the laser cutter to help create an etch resist. A novel technique, worth watching as it progresses.
  • AndyH has moved all the 3D printers to the room formerly known as the office, and they are gradually being commissioned. We will document how to use each printer so that everybody who wants to can use one.
  • Andy is also administering the Little House server, and this will be documented in due course.
  • Yas came in, with Leem. Yas has a laptop which we had diagnosed before Christmas as needing a new power inlet connector. IanB showed Yas how to open up the laptop, up to a point, after which we got instructions from YouTube. After a time it became clear that the degree of disassembly needed was excessive (like replacement of the starter motor in a Mercedes-Benz Smart car), so Yas put it back together again to try another day.
  • Dogan stopped by to see what's going on, but didn't stay long. Hi, good to see you again.
  • ChrisS had some laser cutting to do.
  • PeterH had prepared a DXF in Inkscape, transferred it to Adobe Illustrator, and then to the laser cutter. In the process, he had to take into account the default DPI used by inkscape and the default used by Adobe which is different (hey- these are vector files. What does that have to do with dots per inch?). Peter also found that our laser cutter control software can't read files from the latest Adobe Illustrator, you have to use an earlier Adobe. Peter will write up his experience on our wiki, for the benefit of others treading this path. Edit: here is the page: Inkscape_to_Laser_Cutter_via_Illustrator
  • Jon is expert at many things, and wall fixings are one of his specialities. Today he moved the key safe and fitted a VESA mounting plate, all firm and level, in the room formerly known as the office, now the home of 3D printers.
  • Carla kept busy, but I didn't see at what.
  • Colin came in with a broken wooden chair. ChrisS advised on the best way to apply wood glue to the comb joints. There was no clamp large enough to hold it together while the glue dried, so a rope substitute was used. The whole repair went well.
  • Martin L had diagnosed the problem with the large Mac computer he took away last week, and he brought in a Sky box that needed demolishing. It yielded up a decent size of Hard Disk. Peter helped with the disassembly, having had a few years experience at the place which designed it. Turns out that Yaroslav still works there.
  • Yaroslav had some acrylic disks to cut on the laser cutter.
  • Kevin found a 5v supply and wired it up to a specific plug. This involved soldering and using heat-shrink sleeving, which all went pretty well.
  • Bogdan was still not quite content with the extruder mechanism on the Zombie printer. He modified the mounting which gives the advantage of being able to see the filament passing through it, and giving it a little help if it seems to be following the wrong path. Bogdan left it printing a lid for a Pine single-board computer.
  • Attendance tonight = 14

2019-01-15 Tuesday

  • Andy successfully made a pegboard on the laser cutter.
  • Jane made a tin boat.
  • Chris used the laser cutter
  • Peter did some soldering, assembling some accessories for a Raspberry Pi
  • Garret replaced the battery on a small scales, tried out a device that made all sorts of noises and further refined his triple mousetrap design.
  • Carla continued with a hand-bound book. This week it reached the glue-and-press stage. Carla investigated what the laser cutter can do for her.
  • Welcome and hello to two new faces this week: PeterK is thinking of starting a tool/workshop sharing base in his own area, and Llewellyn came to see what we offer. He might be back some time soon.
  • PaulE drilled some holes in a part-assembled electronic thingy, and gave IanB advice on working the CNC mill.
  • MartinL reviewed MOSFET connection, and will try to do a factory reset on the Mac in the coming week.
  • Sufiyo dropped in to talk about tidying up the HUG garden tools in our front yard, and putting up a small shed in the corner alcove for storing them safely. Jon and IanB thought it would be a good plan, Andres had earlier given his encouragement, so it's over the the HUG garden people to see what could be done.
  • Peter S picked up a power supply and checked its calibration
  • Bogdan started a 3D print on the Zombie printer, and confirmed that the DeltaMaker 3D printer is operational. He also managed to get Slic3r functional again, as it hadn't been working since moving to its new location.
  • Attendance tonight = 15

2019-01-08 Tuesday

  • MartinC continues to look at IOT communications
  • Jane had some items that she drilled through, and discussed how to proceed with building an enormous open-frame handbag
  • AndyH has done some great work in moving the 3D printers into the office area, freeing up bench-space in the main room
  • Carla is starting on a new book
  • Peter continues to convert an ex-aircraft navigation assembly into a computer screen and keyboard
  • Jon and IanB attended to a fault on the laser cutter, where the red finder beam goes off at certain positions of the x-axis. They replaced a fractured wire and all was well on re-test.
  • MartinL made some attempts to re-animate an old Mac but it didn't want to come back to this world. The story is not yet over, more attempts will be made.
  • Briony called in to offer us some useful empty containers, and brought a large tub of Cadbury Celebrations. Thanks, B. We managed to scoff the lot by the end of the evening. Team effort.
  • Hi to Garret. I didn't see what you were up to today.
  • There's an unexplained decorative double-glazed window under the electronics bench. For recycling, or what?
  • Carl called in about 10.30pm after another long day's work. He's going to do something to Phaedra's bike when he gets time.
  • Attendance today = 11