Blog 2024
2024-02-20 Tuesday
- Pierre continued with his PTZ mount build, with a laser cut frame on top of a 'Lasy Susan' for rotation and an axle turned down at the ends to fit the bearings which eventually carry the tilting part
- IanM was helping people again and introduced Pierre to turning steel on the lathe
- Steve was working on some faulty DC-DC converter modules
- Ananth was examining his previous soldering and making some improvements
- Andrew was helping people with 3d printers including
- Mark came to print a mount for his diving project
- Mat came to 3d print a clasp and do some more designing for the next thing
- AndyH was helping
2024-02-13 Tuesday
- Pierre is designing a PTZ camera mount
- Mark has joined the throngs of the laser cutters
- MarkQ came to do some laser cutting
- Andrew journey to fix all the 3d printers continues
- IanM was helping people and doing some lathe work
- Steve continues fixing his light
- Andy opened and did some marquetry
2024-02-06 Tuesday
- BenF was laser cutting some signs
- Steve is repairing a shed light powered by a solar panel
- Andrew was fixing 3d printer
- AndyH opened and ran before the road was closed
- ChrisN was 3d printing some more train pillars
- Ian.M was
- PaulE was coding
2024-01-30 Tuesday
- Andrew was learning how to setup a raspberry pi, assisted by Andrew
- Chris was continuing some 3d printing and working with Fusion 360
- Mat came to see us and started learning Fusion 360
- Pierre came to learn the lasercutter
- Steve was mending a light and looking at fixing a battery, also helping...
- Kev with some soldering
- Andy did some inductions on the laser for 3 people and gave some limited hints on Fusion
- Andrew was looking at 3d printing and helping setup the Pi
- Paul was coding
2024-01-23 Tuesday
Regulars: Paul E, Andy, Andrew, IanM
- Garret came along and was good to see him, looked at fixing a calculator
- Andrew and his son came along for the
- Chris came for the first time and we showed him some 3d printing
2024-01-16 Tuesday
Regulars: Paul E, Martin, Andrew
- Anand - CO2 sensor
- Mark - intro to laser cutter
- David - laser engraving, kartcher cleaner that doesn't run
- Cath M - dehumidifier that needs fixing
2024-01-09 Tuesday
- Andy opened
- Regulars: Ian M, Andrew, Martin, Paul E
- Steve - assisted a soldering task
- Peter - came for inspiration on a project
- David - laser cutting plywood for a box
- Wendy and Deborah - had a steam cleaner that needed fixing
- Anand - soldering headers on more boards
- Lucas and Zac - introduction to 3D printing
- Catherine - introduction to 3D printing
What we have been doing at Little House
Previous years blogs are available from the Main Page