Blog 2024: Difference between revisions

From richmondmakerlabs.uk
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
== 2024-02-13 Tuesday ==
* Pierre is designing a PTZ camera mount
* Mark has joined the throngs of the laser cutters
* MarkQ came to do some laser cutting
* Andrew journey to fix all the 3d printers continues
* IanM was helping people and doing some lathe work
* Steve continues fixing his light
== 2024-02-06 Tuesday ==
* BenF was laser cutting some signs
* Steve is repairing a shed light powered by a solar panel
* Andrew was fixing 3d printer
* AndyH opened and ran before the road was closed
* ChrisN was 3d printing some more train pillars
* Ian.M was
* PaulE was coding
== 2024-01-30 Tuesday ==
== 2024-01-30 Tuesday ==
* Andrew was learning how to setup a raspberry pi, assisted by Andrew
* Andrew was learning how to setup a raspberry pi, assisted by Andrew

Revision as of 20:18, 13 February 2024

2024-02-13 Tuesday

  • Pierre is designing a PTZ camera mount
  • Mark has joined the throngs of the laser cutters
  • MarkQ came to do some laser cutting
  • Andrew journey to fix all the 3d printers continues
  • IanM was helping people and doing some lathe work
  • Steve continues fixing his light

2024-02-06 Tuesday

  • BenF was laser cutting some signs
  • Steve is repairing a shed light powered by a solar panel
  • Andrew was fixing 3d printer
  • AndyH opened and ran before the road was closed
  • ChrisN was 3d printing some more train pillars
  • Ian.M was
  • PaulE was coding

2024-01-30 Tuesday

  • Andrew was learning how to setup a raspberry pi, assisted by Andrew
  • Chris was continuing some 3d printing and working with Fusion 360
  • Mat came to see us and started learning Fusion 360
  • Pierre came to learn the lasercutter
  • Steve was mending a light and looking at fixing a battery, also helping...
  • Kev with some soldering
  • Andy did some inductions on the laser for 3 people and gave some limited hints on Fusion
  • Andrew was looking at 3d printing and helping setup the Pi
  • Paul was coding

2024-01-23 Tuesday

Regulars: Paul E, Andy, Andrew, IanM

  • Garret came along and was good to see him, looked at fixing a calculator
  • Andrew and his son came along for the
  • Chris came for the first time and we showed him some 3d printing

2024-01-16 Tuesday

Regulars: Paul E, Martin, Andrew

  • Anand - CO2 sensor
  • Mark - intro to laser cutter
  • David - laser engraving, kartcher cleaner that doesn't run
  • Cath M - dehumidifier that needs fixing

2024-01-09 Tuesday

  • Andy opened
  • Regulars: Ian M, Andrew, Martin, Paul E
  • Steve - assisted a soldering task
  • Peter - came for inspiration on a project
  • David - laser cutting plywood for a box
  • Wendy and Deborah - had a steam cleaner that needed fixing
  • Anand - soldering headers on more boards
  • Lucas and Zac - introduction to 3D printing
  • Catherine - introduction to 3D printing

What we have been doing at Little House

Previous years blogs are available from the Main Page