User:Ndevenish

From richmondmakerlabs.uk
Revision as of 21:45, 2 February 2017 by Ndevenish (talk | contribs) (Created page with "=2017-02-02 Thursday= * Spent some time trying to get the dual extruder printer working ([http://reprap.org/wiki/Delta_Rostock_mini_G2s Delta Rostock Mini G2S]). Calibrated a...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

2017-02-02 Thursday

  • Spent some time trying to get the dual extruder printer working (Delta Rostock Mini G2S). Calibrated and configured measured values in the firmware, but on heating up the hotend suddenly get "Err: MINTEMP". Tested the thermistor with a meter and is open circuit - probably a loose connection somewhere. Will probably need to dismantle in order to reconnect/find the break.
  • Assembled CNC water cooling system and added 7.5L of water - enough to cover the pump
  • Machined a test depressed circle, successfully, and then machined a mold for my panel knob. Using hard-ish foam for now, need to purchase some better materials.