Andy's Adventures in CNC: Difference between revisions
Jump to navigation
Jump to search
Beardedfool (talk | contribs) |
|||
| Line 5: | Line 5: | ||
*[[Rewiring_the_CNC]] Photos of the setup before/ after rewiring it | *[[Rewiring_the_CNC]] Photos of the setup before/ after rewiring it | ||
*[[CncMill |Main CNC Page]] | *[[CncMill |Main CNC Page]] | ||
*[http://ndevenish.com/2017/01/26/cnc-update.html Nick's Page] | *[http://web.archive.org/web/20230902153420/https://ndevenish.com/2017/01/26/cnc-update.html Nick's Page] | ||
==Inverter== | ==Inverter== | ||
Latest revision as of 07:08, 25 April 2024
CNC Mill
Other Pages
- Rewiring_the_CNC Photos of the setup before/ after rewiring it
- Main CNC Page
- Nick's Page
Inverter
Programming the Inverter
Process is
- UP (or DOWN) arrows to select PD number wanted
- SET to display current reading
- UP (or DOWN) arrows to select setting wanted
- SET to store settings
SHIFT(button with both up and down) changes from single digits (0-9) to decades (10-90)
Correct Settings
For control from xPRO board
- Jumper is between 1 & 2
- PD001 is 0 (You need to press the green button to start the spindle. Seems setting this to 1 doesn't work)
- PD002 is 1
Manual
Board
Control Board: [Spark Concepts CNC xPRO Controller v3] ATmega328P chipon the Xpro
Manual
https://github.com/Spark-Concepts/xPRO/wiki
Grbl/Gcode
Software
Main design
Post processing through
- grbl from autodesks website
- an alternative post processor
Gcode sending/ control of CNC
Universal Gcode sender seems to be favourite at RML | Grbl Panel is the one suggested on the openbuilds website
bCnc seems to allow tool changes
Other
nccorrector gives another view of the gcode
http://www.autoleveller.co.uk/
Ian also suggested freemill but think this would replace fusion
Some useful videos
to understand cnc milling/ this toolpath