MuchMoreStuff

Richmond MakerLabs gets given stuff that no-one else wants, sometimes because it's broken, sometimes it's perfectly good.

We can't store it all, so anything that we can't re-home is destined for scrap. If you fancy anything listed here, just ask about it on the mailing list, on the Telegram group or in person. You can have it.

The following items were donated by PaulB after having a clear-out. They will be available for grabbing until end of September 2021, after which the remaining stuff goes Weee.

• Nextbase Dashcam with 12v cig lighter plug. Model 112, 720p HD https://www.nextbase.com/en-gb/help-and-support/dash-cams/112-support/

• Eora 3D scanner Model E8 with 9v 3A power adaptor but without turntable or documentation. There's only one review for this on Amazon.co.uk, it's described as "This is for sure the most expensive paper weight. 1.0 out of 5 stars"

• Silver Apple wireless 'Magic' keyboard, A1314. Bluetooth. Silver Apple wireless 'Magic' trackpad, A1339. Bluetooth. Mobee Technology 'Magic' inductive charger for both of these, model MO 3212-29.

• Aeon Labs micro smart switch DSC18103 ZWEU. Input 230v 50Hz Max 10A. With product leaflet. Can be controlled by any Z-Wave controller (e.g. Aeotec Z-Stick, Fibaro, Vera, Zipato) https://www.amazon.co.uk/Aeotec-Micro-Smart-Switch-DSC18103-ZWEU

• Pi Zero v1.2 with 4 standard USB A sockets added on & HDMI adaptor. Ian.M has adopted this with the intention of providing a USB tethered Pi for the electronics bench.

• Adafruit WiFi shield (for Arduino Uno?)

• (Two) Adafruit FONA feather. ATMega 32u4 with SIM card holder and GSM antenna. https://www.adafruit.com/product/3027

• Adafruit 8-Channel PWM or Servo FeatherWing https://www.adafruit.com/product/2928

• Adafruit 32u4 Basic Proto Feather https://www.adafruit.com/product/2771

• Muker USB monitor. Maybe shows the voltage and current of a USB connection. No documentation.

• 4-pole 3.5mm jack plug cable adaptor to 3 RCA 'phono' plugs

• LCD screen Itead NX 4827 TO 43_011. 4-way connector: GND, RX, TX, 5V https://nextion.ca/datasheets/nx4827t043_011/

• (Two) Adafruit Feather stacking header kit https://www.adafruit.com/product/2830

• Mojo v2 FPGA Development board https://www.adafruit.com/product/1553 Currently signed out to Ian.M.

• Adafruit DC Motor + Stepper FeatherWing https://www.adafruit.com/product/2927

• CRIUS CO-16 OLED Display Module v1.0 https://www.aliexpress.com/item/32482682912.html

• Set of 4 Kentli Lithium-ion batteries in 1.5v AA format, plus USB charger https://ripitapart.com/2014/12/06/teardown-of-kentli-ph5-1-5-v-li-ion-aa-battery/ They'd got pretty low and the cell protection had activated. After supervised charging for a couple of hours they are part-charged, but need a (cautious) full charge and capacity testing before use.

• Flexible cable for R-Pi camera, 2m long

• FDTI USB to RS232 converter module. Needed for Arduino Pro Mini boards in Electronic bench Arduino kit.

• OAK WiFi module v1.0 Arduino compatible dev board http://digistump.com/oak/

• Featherwing 128x32 monochrome OLED module E218213, possibly https://www.adafruit.com/product/2900

• Photon H Particle P0 WiFi module probably https://docs.particle.io/datasheets/wi-fi/photon-datasheet/

• (Two) 3.7v Lithium ion battery

Most of the AVR / Arduino(ish) boards and accessories (i.e. anything 'Feather') have been tentatively added to the Electronic bench 'Funduino' Arduino kit. However, if you need one, ask!