Blog 2019

From Richmond Maker Labs
Revision as of 14:05, 30 January 2019 by Woodscooter (talk | contribs) (→‎2019-01-29 Tuesday: Added ChrisS)
Jump to navigation Jump to search

What we have been doing at Little House

You can read about previous activity at What we did last year

2019-01-29 Tuesday

  • MartinC continues with that rotary encoder circuit. It has to be a single-sided PCB, to suit Martin's plan for etching.
  • Carla is designing wooden coasters which will be laser-cut
  • PeterH cut an aluminium die-cast equipment case in half, at home, with an angle grinder. He brought it to Little House to finish the job with a hacksaw and some filing.
  • Garret is making a better mousetrap. Honestly, mice will be queuing up to use it.
  • AndyH tested the limits of the laser cutter and found there is no low limit on the Z axis. It took a couple of hours to get back to the top. But well done for sorting it, Andy. Sadly, not everybody who was going to do laser cutting this evening could get it done in the remaining time. All OK now, come early next week and be first in the queue.
  • ChrisS showed us a model church and houses which he had 3D printed and painted. Some very fine quality printwork.
  • Hi to Gavin, second visit to us. Was going to laser-cut a box, but ran out of time.
  • Yas and Leem returned to change the power connector on a Thinkpad. They allowed plenty of time, because it's a tricky operation. With a little help and advice from PaulE, Yas got the connector changed and the Thinkpad has a new lease of life. Plus Yas now has a new skill, knowing how to take apart laptops and more importantly how to put them together again.
  • PaulE worked on a tester, to test a batch of his RS485 voltage level translators. Initially the tests were indicating all devices faulty. After getting the tester right, it became a 100% pass rate.
  • MartinL has taken the small model ekranoplan as far as it can go. Now it may have to be scaled up to develop enough power to lift off the ground.
  • Bogdan was tucked away all evening in the 3D print room. He cleared a blocked hot end with a blowtorch and printed some threaded parts for PLA filament feeds.
  • John came along with an extraordinary orange-coloured radio from another era. It had a loudspeaker with a broken voice-coil wire. After some attempts to repair it with precision soldering, John found we had a spare loudspeaker of about the right size, so he fitted that instead. Fixed!
  • Good to see PaulB again. He's a busy man domestically these days and has less time for tinkering. Paul helped with sorting out the laser cutter and re-levelling the cut bed.
  • ChrisR used the lathe to made a rod with an M3 thread at one end. No, not thread cutting, but tapping and using a piece of studding. Chris ended up making two of these so if he loses one he'll still be OK.
  • PeterS looked in to catch up, and shared some ideas with IanB and with Bogdan.
  • Attendance tonight = 15

2019-01-22 Tuesday

  • MartinC has designed a circuit to connect a rotary encoder to an I2C bus, using a PIC processor. He will create a PCB layout, and then use the laser cutter to help create an etch resist. A novel technique, worth watching as it progresses.
  • AndyH has moved all the 3D printers to the room formerly known as the office, and they are gradually being commissioned. We will document how to use each printer so that everybody who wants to can use one.
  • Andy is also administering the Little House server, and this will be documented in due course.
  • Yas came in, with Leem. Yas has a laptop which we had diagnosed before Christmas as needing a new power inlet connector. IanB showed Yas how to open up the laptop, up to a point, after which we got instructions from YouTube. After a time it became clear that the degree of disassembly needed was excessive (like replacement of the starter motor in a Mercedes-Benz Smart car), so Yas put it back together again to try another day.
  • Dogan stopped by to see what's going on, but didn't stay long. Hi, good to see you again.
  • ChrisS had some laser cutting to do.
  • PeterH had prepared a DXF in Inkscape, transferred it to Adobe Illustrator, and then to the laser cutter. In the process, he had to take into account the default DPI used by inkscape and the default used by Adobe which is different (hey- these are vector files. What does that have to do with dots per inch?). Peter also found that our laser cutter control software can't read files from the latest Adobe Illustrator, you have to use an earlier Adobe. Peter will write up his experience on our wiki, for the benefit of others treading this path.
  • Jon is expert at many things, and wall fixings are one of his specialities. Today he moved the key safe and fitted a VESA mounting plate, all firm and level, in the room formerly known as the office, now the home of 3D printers.
  • Carla kept busy, but I didn't see at what.
  • Colin came in with a broken wooden chair. ChrisS advised on the best way to apply wood glue to the comb joints. There was no clamp large enough to hold it together while the glue dried, so a rope substitute was used. The whole repair went well.
  • Martin L had diagnosed the problem with the large Mac computer he took away last week, and he brought in a Sky box that needed demolishing. It yielded up a decent size of Hard Disk. Peter helped with the disassembly, having had a few years experience at the place which designed it. Turns out that Yaroslav still works there.
  • Yaroslav had some acrylic disks to cut on the laser cutter.
  • Kevin found a 5v supply and wired it up to a specific plug. This involved soldering and using heat-shrink sleeving, which all went pretty well.
  • Bogdan was still not quite content with the extruder mechanism on the Zombie printer. He modified the mounting which gives the advantage of being able to see the filament passing through it, and giving it a little help if it seems to be following the wrong path. Bogdan left it printing a lid for a Pine single-board computer.
  • Attendance tonight = 14

2019-01-15 Tuesday

  • Andy successfully made a pegboard on the laser cutter.
  • Jane made a tin boat.
  • Chris used the laser cutter
  • Peter did some soldering, assembling some accessories for a Raspberry Pi
  • Garret replaced the battery on a small scales, tried out a device that made all sorts of noises and further refined his triple mousetrap design.
  • Carla continued with a hand-bound book. This week it reached the glue-and-press stage. Carla investigated what the laser cutter can do for her.
  • Welcome and hello to two new faces this week: PeterK is thinking of starting a tool/workshop sharing base in his own area, and Llewellyn came to see what we offer. He might be back some time soon.
  • PaulE drilled some holes in a part-assembled electronic thingy, and gave IanB advice on working the CNC mill.
  • MartinL reviewed MOSFET connection, and will try to do a factory reset on the Mac in the coming week.
  • Sufiyo dropped in to talk about tidying up the HUG garden tools in our front yard, and putting up a small shed in the corner alcove for storing them safely. Jon and IanB thought it would be a good plan, Andres had earlier given his encouragement, so it's over the the HUG garden people to see what could be done.
  • Peter S picked up a power supply and checked its calibration
  • Bogdan started a 3D print on the Zombie printer, and confirmed that the DeltaMaker 3D printer is operational. He also managed to get Slic3r functional again, as it hadn't been working since moving to its new location.
  • Attendance tonight = 15

2019-01-08 Tuesday

  • MartinC continues to look at IOT communications
  • Jane had some items that she drilled through, and discussed how to proceed with building an enormous open-frame handbag
  • AndyH has done some great work in moving the 3D printers into the office area, freeing up bench-space in the main room
  • Carla is starting on a new book
  • Peter continues to convert an ex-aircraft navigation assembly into a computer screen and keyboard
  • Jon and IanB attended to a fault on the laser cutter, where the red finder beam goes off at certain positions of the x-axis. They replaced a fractured wire and all was well on re-test.
  • MartinL made some attempts to re-animate an old Mac but it didn't want to come back to this world. The story is not yet over, more attempts will be made.
  • Briony called in to offer us some useful empty containers, and brought a large tub of Cadbury Celebrations. Thanks, B. We managed to scoff the lot by the end of the evening. Team effort.
  • Hi to Garret. I didn't see what you were up to today.
  • There's an unexplained decorative double-glazed window under the electronics bench. For recycling, or what?
  • Carl called in about 10.30pm after another long day's work. He's going to do something to Phaedra's bike when he gets time.
  • Attendance today = 11