Rewiring the CNC

From richmondmakerlabs.uk
Revision as of 20:49, 17 December 2021 by Beardedfool (talk | contribs) (→‎Manuals)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Photos as Ian and Andy's move the control board and power supply out from the path of the CNC

Manuals

Andy's_Adventures_in_CNC#Manual

Wiring Diagram

File:CNCRouterWiring.pdf


Current problems

Spindle

We think from the inverter manual that

  • PD001= Decides whether control is manual or via the board
  • PD002= Changes the incoming voltage based on the speed of the board
  • PD070= Analoge Volage input - should be 1 (0-5V) as we've confirmed this is what the board is outputting

Results:

PD001=0 PD002=0 Spindle turns on/ off from controller but speed control dial doesn't work

PD001=0 PD002=1

  • Without pressing green button M commands do nothing
  • Error when pressing green button and issuing M commend
    • Interestingly M3 (full on) doesn't work

PD001=1 PD002=1 Spindle should (?) be controlled by board but no M commands work

Photos

Current setup as of Jan 2021

Board

Back

Jumpers

CNC estop box internals


Spindle Inverter Speed control

This wire comes from the estop box to the spindle inverter front panel and delivered a 0-5V range

Inverter power

Incoming power and

Prior to changes