Talk:Denford Micromill & Microturn blog

From richmondmakerlabs.uk
Revision as of 08:03, 1 November 2023 by Steve (talk | contribs) (Steve moved page Talk:Denford Micromill Microturn electronics to Talk:Denford Micromill & Microturn blog: Not just working on electronics now)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Re: Kinematics tuning - Next to the OpenBuilds CNC mill in the cloakroom, we have a machinists clamp set similar to this, with M8 studs, so the 10mm T slot version. Unfortunately I suspect that's too big.

Dial indicators are on the shelf in the kitchen above the CJ18A Lathe. There's one with a mag. base stand, and two others without stands/mountings in an open topped wooden box. All are analog plunger type. IanM (talk) 10:00, 12 October 2023 (UTC)

Thanks Ian, that should be enough to get at initial tune done, at least enough to have the machine running! Steve (talk) 08:00, 13 October 2023 (UTC)