File:Lasercut Kerf Calibration.zip

From richmondmakerlabs.uk
Revision as of 11:39, 10 September 2022 by IanM (talk | contribs) (Laser Cutter Kerf Calibration jig (test-piece) Formats: .scad OpenSCAD customizable sourcecode .dxf (100x30mm) .rld RDWorks job (100x30mm) See sourcecode for instructions.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Lasercut_Kerf_Calibration.zip(file size: 16 KB, MIME type: application/zip)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Summary

Laser Cutter Kerf Calibration jig (test-piece) Formats:

  .scad OpenSCAD customizable sourcecode
  .dxf (100x30mm)
  .rld RDWorks job (100x30mm)

See sourcecode for instructions.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current11:39, 10 September 2022 (16 KB)IanM (talk | contribs)Laser Cutter Kerf Calibration jig (test-piece) Formats: .scad OpenSCAD customizable sourcecode .dxf (100x30mm) .rld RDWorks job (100x30mm) See sourcecode for instructions.

The following page uses this file: