File:Lathe Induction Bushing.pdf: Difference between revisions

From richmondmakerlabs.uk
Jump to navigation Jump to search
(Engineering drawing of a flanged bushing for Lathe Induction training. Uses ~15 mm of 12 mm / 1/2" dia. brass stock. Created by Ian.M for RML.)
 
 
Line 1: Line 1:
== Summary ==
== Summary ==
Engineering drawing of a flanged bushing for Lathe Induction training.  Uses ~15 mm of 12 mm / 1/2" dia. brass stock.  Created by Ian.M for RML.
Engineering drawing of a flanged bushing for Lathe Induction training.  Uses ~15 mm of 12 mm / 1/2" dia. brass stock.  Demonstrates the four key lathe skills: facing, turning, drilling, and parting off.  Created by Ian.M for RML.

Latest revision as of 13:18, 18 February 2024

Summary

Engineering drawing of a flanged bushing for Lathe Induction training. Uses ~15 mm of 12 mm / 1/2" dia. brass stock. Demonstrates the four key lathe skills: facing, turning, drilling, and parting off. Created by Ian.M for RML.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current13:09, 18 February 2024 (190 KB)IanM (talk | contribs)Engineering drawing of a flanged bushing for Lathe Induction training. Uses ~15 mm of 12 mm / 1/2" dia. brass stock. Created by Ian.M for RML.

There are no pages that use this file.