Search results

...tes?) to complete, and didn't turn out too well. The key is to make small test pieces to find the best settings for any particular job. ...cleaner which had suddenly stopped working. They took it apart and used a test meter to check that the mains cable, fuse, plug and switch were all OK. In ...

...s quite interested in doing a little work on the model plane, leading to a test flight. ...ickers for power plugs on the CNC mill and other places, supplied some 4mm test leads, and worked on his voltmeter project ...

...tailstock and sweeping it with a dial indicator on the carriage. Finally a test cut should be taken at either end of a bar between centers, and the diamete * <s>''Do test cuts and start noting shim stack-ups for various tools.''</s> ...

...r, and learned a trick from IanM on how to more securely solder wires onto test clips) * Leo did further fettling to the Geeetech 3D printer, and produced some test prints that look quite promising. ...

* PaulB further assembled the lathe and did some test operation - worked well! ...ulate how much power you machine is actually producing. We then repeat the test after each mirror bounce and work out if one is causing a loss of power. ...

...me 3D printing on the zombie printer, which is now working well. He did a test to confirm that forced cooling would improve surface finish. There's no spa * Jon made some test engraving and test cutting on the laser cutter, to re-establish guidance on power levels and c ...

and after we install it we can test the following: ...

* Carl has assembled his 3D printer and will try a test print soon ...