User:IanM: Difference between revisions
No edit summary |
|||
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[File:IanM.jpg|thumb]] | [[File:IanM.jpg|thumb]]Hi, I'm '''Ian M''', | ||
Hi, I'm Ian M, | |||
I'm just another RML member who's reasonably competent with electronics, including digital and MCUs, computers and mechanical stuff, after a couple of decades in the consumer electronics service trade. | I'm just another RML member who's reasonably competent with electronics, including digital and MCUs, computers and mechanical stuff, after a couple of decades in the consumer electronics service trade. | ||
| Line 8: | Line 7: | ||
My motto should probably be: "Knows entirely too much about not enough subjects!" | My motto should probably be: "Knows entirely too much about not enough subjects!" | ||
==Projects== | ==Projects== | ||
My main project back in 2022 was assembling, tuning and upgrading a £99 3D printer, and learning the necessary software to fully use it. In 2023, I was heavily involved with repairing, maintaining and upgrading the RML CJ18A lathe. | |||
* My main project back in 2021 was a robot buggy. | |||
* In 2022 I was assembling, tuning and upgrading a £99 3D printer, and learning the necessary software to fully use it. | |||
* In 2023, I was heavily involved with repairing, maintaining and upgrading the RML CJ18A lathe. | |||
* This year (2024) I've been getting into CNC machining. | |||
===CJ18A mini-lathe=== | ===CJ18A mini-lathe=== | ||
| Line 14: | Line 19: | ||
===£99 3D Printer=== | ===£99 3D Printer=== | ||
[[Ian M's £99 ZHUHAI CTC DiY I3 3D printer| | [[Ian M's £99 ZHUHAI CTC DiY I3 3D printer|ZHUHAI CTC DiY I3 3D printer]] - a Prusa I3 mk1 derivative, very similar to the RML [[Geetech I3 Pro B|Geetech]] machine, except with a laser cut plywood frame. Its not perfect yet but is a usable workhorse. | ||
===Robotics=== | ===Robotics=== | ||
My two wheel 'taildragger' Arduino robot buggy [[Ian M's Robot buggy build|build notes are here]] and my notes on replacing the USB lead, used for monitoring and firmware upload, with a [[WiFi 'tethered' Arduino robot|WiFi 'tether' are here]]. | |||
===Other Stuff=== | ===Other Stuff=== | ||
* I'm collecting my [[Ian M's OpenSCAD stuff|OpenSCAD notes here]]. | * I'm collecting my [[Ian M's OpenSCAD stuff|OpenSCAD notes here]] and my [[Ian M's Adventures in CNC|CNC notes here]]. | ||
* I've also got some notes on [[Running Atmel Studio 4 on Win10]], as I saved an Atmel STK500 AVR programmer/dev board from the RML eWaste bin. If you need to parallel or HV program an Atmel AVR in DIP package, or HV program one on a board with an ISP header, I can probably help. | * I've also got some notes on [[Running Atmel Studio 4 on Win10]], as I saved an Atmel STK500 AVR programmer/dev board from the RML eWaste bin. If you need to parallel or HV program an Atmel AVR in DIP package, or HV program one on a board with an ISP header, I can probably help. | ||
| Line 26: | Line 31: | ||
== Useful Links == | == Useful Links == | ||
=== Plastics === | === Plastics === | ||
[[https://www.henkel-adhesives.com/be/en/applications/all-applications/how-to/bonding-plastics.html Hard to Bond Plastics?]] - | [[https://www.henkel-adhesives.com/be/en/applications/all-applications/how-to/bonding-plastics.html Hard to Bond Plastics?]] - Download 'LOCTITE® Design Guide for Bonding Plastics' - Henkel (Loctite)'s notes on bonding difficult plastics, surface treatments etc. | ||
[[https://www-eng.lbl.gov/~shuman/XENON/REFERENCES&OTHER_MISC/Lightpipe%20design.pdf Light Guide Techniques Using LED Lamps]] - Notes on designing light guides, with an emphasis on efficient use of LED sources. Agilent Technologies' Application Brief I-003 | |||
=== Soldering & Brazing === | === Soldering & Brazing === | ||
[[https://archive.org/details/09solderingandbrazing/ Soldering And Brazing]] by 'Tubal Cain' (a pen-name of Tom Walsh), Workshop Practice series #09, Argus Books, ISBN-10: 0852428456 | [[https://archive.org/details/09solderingandbrazing/ Soldering And Brazing]] by 'Tubal Cain' (a pen-name of Tom Walsh), Workshop Practice series #09, Argus Books, ISBN-10: 0852428456 | ||
=== Screw Fasteners === | === Screw Fasteners === | ||
[https://en.m.wikipedia.org/wiki/List_of_screw_drives Screw Drives] - Wikipedia's list of screw head/driver types. Good for finding the proper name for that obscure screw head so you can try to buy a driver for it! | [https://en.m.wikipedia.org/wiki/List_of_screw_drives Screw Drives] - Wikipedia's list of screw head/driver types. Good for finding the proper name for that obscure screw head so you can try to buy a driver for it! | ||
Latest revision as of 07:08, 7 October 2024
Hi, I'm Ian M,
I'm just another RML member who's reasonably competent with electronics, including digital and MCUs, computers and mechanical stuff, after a couple of decades in the consumer electronics service trade.
Other interests include sailing and boat maintenance - not that I do much nowadays - and reading SF. I used to be seriously into Sinclair 8 bit computers, and still have a fair bit of vintage Sinclair kit, in various states of operability. I also have a few vintage PCs.
My motto should probably be: "Knows entirely too much about not enough subjects!"
Projects
- My main project back in 2021 was a robot buggy.
- In 2022 I was assembling, tuning and upgrading a £99 3D printer, and learning the necessary software to fully use it.
- In 2023, I was heavily involved with repairing, maintaining and upgrading the RML CJ18A lathe.
- This year (2024) I've been getting into CNC machining.
CJ18A mini-lathe
My CJ18A mini-lathe notes are here. I'm now one of the Lathe trainers and maintainers, and can provide your Lathe Induction (ask on Telegram). Thanks IanB for my Induction back in 2022.
£99 3D Printer
ZHUHAI CTC DiY I3 3D printer - a Prusa I3 mk1 derivative, very similar to the RML Geetech machine, except with a laser cut plywood frame. Its not perfect yet but is a usable workhorse.
Robotics
My two wheel 'taildragger' Arduino robot buggy build notes are here and my notes on replacing the USB lead, used for monitoring and firmware upload, with a WiFi 'tether' are here.
Other Stuff
- I'm collecting my OpenSCAD notes here and my CNC notes here.
- I've also got some notes on Running Atmel Studio 4 on Win10, as I saved an Atmel STK500 AVR programmer/dev board from the RML eWaste bin. If you need to parallel or HV program an Atmel AVR in DIP package, or HV program one on a board with an ISP header, I can probably help.
Useful Links
Plastics
[Hard to Bond Plastics?] - Download 'LOCTITE® Design Guide for Bonding Plastics' - Henkel (Loctite)'s notes on bonding difficult plastics, surface treatments etc.
[Light Guide Techniques Using LED Lamps] - Notes on designing light guides, with an emphasis on efficient use of LED sources. Agilent Technologies' Application Brief I-003
Soldering & Brazing
[Soldering And Brazing] by 'Tubal Cain' (a pen-name of Tom Walsh), Workshop Practice series #09, Argus Books, ISBN-10: 0852428456
Screw Fasteners
Screw Drives - Wikipedia's list of screw head/driver types. Good for finding the proper name for that obscure screw head so you can try to buy a driver for it!