All public logs

Combined display of all available logs of richmondmakerlabs.uk. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 10:37, 23 December 2022 IanM talk contribs created page Ian M's Robot buggy build (Created page with ".LOG Build notes for Ian's & Haysam's 2WD Robot Buggy projects <hr> ==14:15 11/07/2021== Ordered from Amazon UK 1 of: ELEGOO 6PCS 170 tie-points Mini Breadboard kit for Arduino Project 6 color Breadboards Mini for Electronic Kits UNO R3 MEGA NANO ASIN: B01N0YWIR7 £6.99 2 of: Diymore 2WD Robot Smart Car Chassis DIY Kits Intelligent Engine with UNO R3,Ultrasonic Module Toy Car Robotic Kit ASIN: B08VHVNMXN £35.99 each 1 of: Youmile 5Pcs Speed Measuring Sensor LM393 Spee...")
• 12:07, 22 December 2022 IanM talk contribs created page File:SetupRobotLink.zip (Windows batch script to setup a WiFi 'tether' to an Arduino robot using com0com and an ESP8266 running esp-link.)
• 12:07, 22 December 2022 IanM talk contribs uploaded File:SetupRobotLink.zip (Windows batch script to setup a WiFi 'tether' to an Arduino robot using com0com and an ESP8266 running esp-link.)
• 10:37, 22 December 2022 IanM talk contribs created page WiFi 'tethered' Arduino robot (Connecting to an Arduino over WiFi as-if it was plugged in via USB.)
• 23:11, 18 December 2022 Woodscooter talk contribs created page Blog 2023 (Created page with "__NOTOC__ == What we have been doing at Little House == Previous years blogs are available from the Main Page")
• 15:57, 18 December 2022 Woodscooter talk contribs created page File:FirstFloor.pdf
• 15:57, 18 December 2022 Woodscooter talk contribs uploaded File:FirstFloor.pdf
• 15:56, 18 December 2022 Woodscooter talk contribs created page File:GroundFloor.pdf
• 15:56, 18 December 2022 Woodscooter talk contribs uploaded File:GroundFloor.pdf
• 12:38, 11 December 2022 Woodscooter talk contribs created page File:20221206 BatDetect.jpg
• 12:38, 11 December 2022 Woodscooter talk contribs uploaded File:20221206 BatDetect.jpg
• 12:37, 11 December 2022 Woodscooter talk contribs uploaded a new version of File:20221206 Rocket.jpg
• 12:37, 11 December 2022 Woodscooter talk contribs uploaded a new version of File:20221206 Electronics.jpg
• 11:54, 11 December 2022 Woodscooter talk contribs created page File:20221206 Electronics.jpg
• 11:54, 11 December 2022 Woodscooter talk contribs uploaded File:20221206 Electronics.jpg
• 11:53, 11 December 2022 Woodscooter talk contribs created page File:20221206 Rocket.jpg
• 11:53, 11 December 2022 Woodscooter talk contribs uploaded File:20221206 Rocket.jpg
• 00:49, 9 December 2022 IanM talk contribs created page File:Electronics Bench 2022.jpeg (The electronics bench moved across the workshop in the great 2021 post-COVID reorganisation. There's a bit more space to work on larger projects, less wandering around looking for parts, and best of all, no more risk of a passer-by jogging your elbow when soldering something delicate! Photo by Andrés M-P)
• 00:49, 9 December 2022 IanM talk contribs uploaded File:Electronics Bench 2022.jpeg (The electronics bench moved across the workshop in the great 2021 post-COVID reorganisation. There's a bit more space to work on larger projects, less wandering around looking for parts, and best of all, no more risk of a passer-by jogging your elbow when soldering something delicate! Photo by Andrés M-P)
• 10:45, 1 December 2022 IanM talk contribs created page File:STK500 test.jpg (Ian's STK500 with an ATmega16 (in far socket) running an AVR assembler test program with a joystick on PA0 & PA1, giving ADC results in decimal and joystick controlled cross-hairs on a large HD44780 16x2 character LCD module.)
• 10:45, 1 December 2022 IanM talk contribs uploaded File:STK500 test.jpg (Ian's STK500 with an ATmega16 (in far socket) running an AVR assembler test program with a joystick on PA0 & PA1, giving ADC results in decimal and joystick controlled cross-hairs on a large HD44780 16x2 character LCD module.)
• 17:18, 30 November 2022 IanM talk contribs created page Running Atmel Studio 4 on Win10 (Working with AVR assembly language using old tools under Windows 10)
• 11:30, 13 November 2022 IanM talk contribs created page File:IanM.jpg (Ian M)
• 11:30, 13 November 2022 IanM talk contribs uploaded File:IanM.jpg (Ian M)
• 09:39, 5 November 2022 IanM talk contribs created page File:ISO and UTS Thread Dimensions.svg (ISO metric thread profile. Public Domain Source: Wikimedia Commons https://en.wikipedia.org/wiki/File:ISO_and_UTS_Thread_Dimensions.svg)
• 09:39, 5 November 2022 IanM talk contribs uploaded File:ISO and UTS Thread Dimensions.svg (ISO metric thread profile. Public Domain Source: Wikimedia Commons https://en.wikipedia.org/wiki/File:ISO_and_UTS_Thread_Dimensions.svg)
• 23:07, 21 October 2022 IanM talk contribs created page File:JCQ3 Insert.jpg
• 23:07, 21 October 2022 IanM talk contribs uploaded File:JCQ3 Insert.jpg
• 13:25, 21 October 2022 IanM talk contribs created page File:Carbide set.jpg (Set of Tungsten carbide insert lathe tools)
• 13:25, 21 October 2022 IanM talk contribs uploaded File:Carbide set.jpg (Set of Tungsten carbide insert lathe tools)
• 10:48, 14 October 2022 IanM talk contribs created page File:VESA mount.jpg (Ian M's machined VESA mounting plate (left) and plate from Dell monitor stand it must match (right). The translucent washer shows the size of the original center hole.)
• 10:48, 14 October 2022 IanM talk contribs uploaded File:VESA mount.jpg (Ian M's machined VESA mounting plate (left) and plate from Dell monitor stand it must match (right). The translucent washer shows the size of the original center hole.)
• 05:06, 7 October 2022 IanM talk contribs created page File:BC puller 2.jpg (Using the custom puller for the B-C stub shaft)
• 05:06, 7 October 2022 IanM talk contribs uploaded File:BC puller 2.jpg (Using the custom puller for the B-C stub shaft)
• 05:06, 7 October 2022 IanM talk contribs created page File:BC puller 1.jpg (The custom puller for the lathe's change gear B-C stub shaft)
• 05:06, 7 October 2022 IanM talk contribs uploaded File:BC puller 1.jpg (The custom puller for the lathe's change gear B-C stub shaft)
• 06:10, 2 October 2022 IanM talk contribs created page Ian M's Lathe Notes (Created page with "Currently a disorganized mess that I hope to bring some order to as I become more experienced with the RML CJ18A mini-lathe.")
• 11:39, 10 September 2022 IanM talk contribs created page File:Lasercut Kerf Calibration.zip (Laser Cutter Kerf Calibration jig (test-piece) Formats: .scad OpenSCAD customizable sourcecode .dxf (100x30mm) .rld RDWorks job (100x30mm) See sourcecode for instructions.)
• 11:39, 10 September 2022 IanM talk contribs uploaded File:Lasercut Kerf Calibration.zip (Laser Cutter Kerf Calibration jig (test-piece) Formats: .scad OpenSCAD customizable sourcecode .dxf (100x30mm) .rld RDWorks job (100x30mm) See sourcecode for instructions.)
• 11:29, 10 September 2022 IanM talk contribs created page File:Lasercut Kerf Calibration.png (Render of kerf calibration jig)
• 11:29, 10 September 2022 IanM talk contribs uploaded File:Lasercut Kerf Calibration.png (Render of kerf calibration jig)
• 12:28, 9 September 2022 IanM talk contribs created page OpenSCAD to Laser Cutter (Created page with "[https://openscad.org/ OpenSCAD], although normally used for 3D modelling, can be used for 2D modelling for laser cutting. It can render 2D geometry direct to .dxf export, or you can use the projection() module to [https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/3D_to_2D_Projection slice or flatten 3D geometry] to get 2D geometery to render for export. OpenSCAD does not export curves as arcs, so they are always built up of straight line segments. RDWorks does not li...")
• 23:15, 30 August 2022 Beardedfool talk contribs created page Hackspace software (Created page with " A list of software used in various hackspaces around the world https://wiki.hackerspaces.org/Hackerspace_Software")
• 11:38, 30 August 2022 Woodscooter talk contribs created page File:20220823solder-link.jpg
• 11:38, 30 August 2022 Woodscooter talk contribs uploaded File:20220823solder-link.jpg
• 11:38, 30 August 2022 Woodscooter talk contribs created page File:20220823camera.jpg
• 11:38, 30 August 2022 Woodscooter talk contribs uploaded File:20220823camera.jpg
• 15:42, 21 August 2022 IanM talk contribs created page File:DremelCap.png (OpenSCAD BOSL2 render of the replacement Dremel nose cap)
• 15:42, 21 August 2022 IanM talk contribs uploaded File:DremelCap.png (OpenSCAD BOSL2 render of the replacement Dremel nose cap)
• 15:40, 21 August 2022 IanM talk contribs created page File:DremelCapProfile.png (The Bezier curve profile used for the replacement cap)