All public logs

Combined display of all available logs of richmondmakerlabs.uk. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 06:10, 2 October 2022 IanM talk contribs created page Ian M's Lathe Notes (Created page with "Currently a disorganized mess that I hope to bring some order to as I become more experienced with the RML CJ18A mini-lathe.")
• 11:39, 10 September 2022 IanM talk contribs created page File:Lasercut Kerf Calibration.zip (Laser Cutter Kerf Calibration jig (test-piece) Formats: .scad OpenSCAD customizable sourcecode .dxf (100x30mm) .rld RDWorks job (100x30mm) See sourcecode for instructions.)
• 11:39, 10 September 2022 IanM talk contribs uploaded File:Lasercut Kerf Calibration.zip (Laser Cutter Kerf Calibration jig (test-piece) Formats: .scad OpenSCAD customizable sourcecode .dxf (100x30mm) .rld RDWorks job (100x30mm) See sourcecode for instructions.)
• 11:29, 10 September 2022 IanM talk contribs created page File:Lasercut Kerf Calibration.png (Render of kerf calibration jig)
• 11:29, 10 September 2022 IanM talk contribs uploaded File:Lasercut Kerf Calibration.png (Render of kerf calibration jig)
• 12:28, 9 September 2022 IanM talk contribs created page OpenSCAD to Laser Cutter (Created page with "[https://openscad.org/ OpenSCAD], although normally used for 3D modelling, can be used for 2D modelling for laser cutting. It can render 2D geometry direct to .dxf export, or you can use the projection() module to [https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/3D_to_2D_Projection slice or flatten 3D geometry] to get 2D geometery to render for export. OpenSCAD does not export curves as arcs, so they are always built up of straight line segments. RDWorks does not li...")
• 15:42, 21 August 2022 IanM talk contribs created page File:DremelCap.png (OpenSCAD BOSL2 render of the replacement Dremel nose cap)
• 15:42, 21 August 2022 IanM talk contribs uploaded File:DremelCap.png (OpenSCAD BOSL2 render of the replacement Dremel nose cap)
• 15:40, 21 August 2022 IanM talk contribs created page File:DremelCapProfile.png (The Bezier curve profile used for the replacement cap)
• 15:40, 21 August 2022 IanM talk contribs uploaded File:DremelCapProfile.png (The Bezier curve profile used for the replacement cap)
• 11:03, 21 August 2022 IanM talk contribs created page File:Bezier.xls (Excel 97 - 2003 GUI Bezier curve editor for curves with 3, 4 & 5 control points. Outputs lists of points for OpenSCAD.)
• 11:03, 21 August 2022 IanM talk contribs uploaded File:Bezier.xls (Excel 97 - 2003 GUI Bezier curve editor for curves with 3, 4 & 5 control points. Outputs lists of points for OpenSCAD.)
• 10:37, 21 August 2022 IanM talk contribs created page File:Bezier.png (Screenshot of Excel97 spreadsheet to create Bezier curves)
• 10:37, 21 August 2022 IanM talk contribs uploaded File:Bezier.png (Screenshot of Excel97 spreadsheet to create Bezier curves)
• 10:17, 4 August 2022 IanM talk contribs uploaded a new version of File:RML Defect List.xls
• 10:07, 4 August 2022 IanM talk contribs created page Equipment and Tool Defect List (What's currently not working or has recently been fixed.)
• 08:25, 27 July 2022 IanM talk contribs created page File:RML Defect List.xls (AKA: Equipment Snags Transcribed by ~~~~)
• 08:25, 27 July 2022 IanM talk contribs uploaded File:RML Defect List.xls (AKA: Equipment Snags Transcribed by ~~~~)
• 07:00, 27 July 2022 IanM talk contribs created page File:Raphael's adapter printing.jpg
• 07:00, 27 July 2022 IanM talk contribs uploaded File:Raphael's adapter printing.jpg
• 09:33, 24 July 2022 IanM talk contribs created page File:Bentpyramid.png
• 09:33, 24 July 2022 IanM talk contribs uploaded File:Bentpyramid.png
• 09:32, 24 July 2022 IanM talk contribs created page File:Truncpyramid.png
• 09:32, 24 July 2022 IanM talk contribs uploaded File:Truncpyramid.png
• 08:26, 24 July 2022 IanM talk contribs created page File:NonBOSL screw section+profile.png
• 08:26, 24 July 2022 IanM talk contribs uploaded File:NonBOSL screw section+profile.png
• 21:26, 23 July 2022 IanM talk contribs created page File:NonBOSL screw.zip ('vanilla' OpenSCAD source for a M10 male thread.)
• 21:26, 23 July 2022 IanM talk contribs uploaded File:NonBOSL screw.zip ('vanilla' OpenSCAD source for a M10 male thread.)
• 21:24, 23 July 2022 IanM talk contribs created page File:NonBOSL screw.png
• 21:24, 23 July 2022 IanM talk contribs uploaded File:NonBOSL screw.png
• 14:07, 20 July 2022 IanM talk contribs created page File:Bed mesh.png
• 14:07, 20 July 2022 IanM talk contribs uploaded File:Bed mesh.png
• 12:20, 20 July 2022 IanM talk contribs created page File:BLtouch combiner board.png
• 12:20, 20 July 2022 IanM talk contribs uploaded File:BLtouch combiner board.png
• 11:49, 20 July 2022 IanM talk contribs created page File:BLtouch tester.zip
• 11:49, 20 July 2022 IanM talk contribs uploaded File:BLtouch tester.zip
• 06:44, 20 July 2022 IanM talk contribs created page File:Tensioner4.zip (OpenSCAD model of CTC DiY I3 Pro B 3D printer belt tensioner body + rendered STL and PNG files. CC BY-NC-SA)
• 06:44, 20 July 2022 IanM talk contribs uploaded File:Tensioner4.zip (OpenSCAD model of CTC DiY I3 Pro B 3D printer belt tensioner body + rendered STL and PNG files. CC BY-NC-SA)
• 05:23, 20 July 2022 IanM talk contribs created page Ian M's OpenSCAD stuff (Created page with "I'm collecting my [https://openscad.org/ OpenSCAD] notes here. If you are looking for a tutorial you are in the wrong place as I doubt they'll ever be that well organized. == Customizer == The [https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Customizer OpenSCAD customizer] is very powerful, but by default, every variable that you define at the top level in your file before any module definitions appears in it. Often, that's not what you want as many of them are pro...")
• 07:25, 19 July 2022 IanM talk contribs created page File:CTC Tensioner.png
• 07:25, 19 July 2022 IanM talk contribs uploaded File:CTC Tensioner.png
• 08:00, 17 July 2022 IanM talk contribs created page File:Ian's CTC I3 Boards and Wiring.jpg
• 08:00, 17 July 2022 IanM talk contribs uploaded File:Ian's CTC I3 Boards and Wiring.jpg
• 16:47, 16 July 2022 IanM talk contribs created page File:Ian's CTC I3 IEC Boot + extra clamping nuts on Y strut.jpg (Insulating rubber boot on IEC connector and extra clamping nuts on Y strut (allthread))
• 16:47, 16 July 2022 IanM talk contribs uploaded File:Ian's CTC I3 IEC Boot + extra clamping nuts on Y strut.jpg (Insulating rubber boot on IEC connector and extra clamping nuts on Y strut (allthread))
• 16:42, 16 July 2022 IanM talk contribs created page File:Ian's CTC I3 After BLtouch upgrade.jpg (Ian's CTC DiY I3 3D printer, after BLtouch (clone) upgrade)
• 16:42, 16 July 2022 IanM talk contribs uploaded File:Ian's CTC I3 After BLtouch upgrade.jpg (Ian's CTC DiY I3 3D printer, after BLtouch (clone) upgrade)
• 15:53, 16 July 2022 IanM talk contribs created page Talk:Current Projects (Created page with "IanM: Should this page be renamed 'Current and Past Projects', as it doesn't seem to be very current?")
• 13:20, 16 July 2022 IanM talk contribs created page Ian M's £99 ZHUHAI CTC DiY I3 3D printer (Ian M's 3D printer build)
• 13:12, 16 July 2022 IanM talk contribs created page User:IanM (Ian M's profile)